Shenzhen Senring Electronics Co., Ltd.
Shenzhen Senring Electronics Co., Ltd.
Add to Cart
5000RPM Light Weight Hollow Shaft High Speed Slip Ring With Hole Size 12.7mm OD 56mm
Description of G012-12 High Speed slip ring
SENRING G012-12 series High Speed,a kind of Hollow Shaft slip ring.With hole size 12.7mm,OD 56mm,integrated structure, light weight,high IP grade.Adopt the same materials for aero-engines (such as high temperature alloys and composites material)
Features of G012-12 High Speed slip ring
1. Max speed 5000RPM;
2. Hole size 12.7mm,OD 56mm;
3. Stablely transmit 12 circuit 5A signal or power;
4. Adopt high temperature alloys and composites materials,no need cooling;
5. Integrated structure, easy installation,high concentricity;
6. Typical application: lab and any testing equipments need to transmit signal in high speed rotating;
| Mechanical Data | |
| spec | data |
| Rotating speed | 5000RPM |
| working temp. | -30℃∼80℃ |
| work humidity | 0~85%RH |
| contact material | SENRING Slip Rings Grade Table |
| housing material | saluminum alloy |
| torque | 0.05N.m;+0.02N.m/6 circuits |
| Electrical Data | |
| spec | data |
| voltage range | 0∼440VAC/VDC |
| insulation resistance | ≥1000MΩ/500VDC |
| lead wire spec. | AWG22# Silver-plated teflon |
| lead wire length | standard 300mm(can be customized) |
| Dielectric Strength | 800VAC@50Hz,60s |
| Electrical noise | < 0.01Ω |
| certificate | RoHS,CE |
| IP grade | IP51 |
Drawing of G012-12 High Speed slip ring
Slip ring work at very high speed with the specified life span and without signal losing is always a challenge for slip ring designer & manufacturer, our RD team accumulate their 20 years experience in high speed slip ring researching, and they find good solutions on it such as contactless, adopt special contacting material , use special bearing or change the traditional configuration ,etc, the solutions proved to be very successfully and our high speed slip ring are widely used in military and industry.